C5112-C5131 conventional VTL

Single column vertical lathe
Name	Unit	C5112	C5116	C5123	C5125	C5131
Max. turning diameter of vertical tool post	mm	1250	1600	2300	2500	3150
Max. turning diameter of side tool post	mm	1100	1400	2000	2200	3000
Working table diameter	mm	1000	1400	2000	2200	2500
Max. height of work-piece	mm	1000	1000	1250	1300	1400
Max. weight of work-piece	t	3.2	5	8	10	10
Working table range of rotation speed	r/min	6.3～200	5～160	3.2～100	2～62	2～62
Working table step of rotation speed	step	16	16	16	16	16
Feed amount of vertical tool post	mm/min	0.5～500	0.5～500	0.5～500	0.5～500	0.5～500
Feed step of vertical tool post	step	stepless	stepless	stepless	stepless	stepless
Feed amount of side tool post	mm/min	0.8～86	0.8～86	0.8～86	0.6～56.56	0.6～56.56
Feed step of side tool post	step	12	12	12	12	12
Max. cutting force of vertical tool post	KN	20	25	25	25	34
Max. cutting force of side tool post	KN	20	20	20	20	20
Max. total cutting force	KN	35	40	40	40	40
Horizontal travel of vertical tool post	mm	700	915	1210	1310	1600
Vertical travel of vertical tool post	mm	650	800/1000	800/1000	800/1000	800/1000
Swing angle of vertical tool post	°	±30	±30	±30	±30	±30
Vertical tool post rapid moving speed	m/min	1.8	1.8	1.8	1.8	1.8
Side tool post rapid moving speed	m/min	1.8	1.8	1.8	1.8	1.8
Crossbeam lifting speed	m/min	0.44	0.44	0.44	0.44	0.44
Tool bar section size	mm	30×40	30×40	30×40	30×40	40×50
Power of main motor	KW	22	30	30	37	45
Weight of machine(approx.)	t	9.5	12.1	19.8	21.8	30
Dimensions of machine (LxWxH)	mm	2280×2550×3400	2662×2800×3550	3235×3240×3910	3380×3360×4000	3450×3940×4200

Brief introduction :
1. This machine is suitable for machining of all kinds of industries. It can process external column face, circular conical surface,head face, shotted,
    severance of car wheel lathe.
2. Working table is to adopt hydrostatic guideway. The spindle is to use NN30( Grade D) bearing and able to turn precisely,Bearing capacity of bearing is good.
3. Gear case is to use 40 Cr gear of gear grinding. It has high precision and little noise. Both hydraulic part and electrical equipment are used famous-brand
    products in China.
4. Plastic coated guide ways are wearable.Centralized lubricating oil supplying is convenient.
5. Foundry technique of lathe is to use lost foam foundry (short for LFF) technique. Cast part has good quality.

• 没有了！
• C5240-C5263 Conventional VTL

• 
  press brake machine, bending machine
• 
  Cut to Length Line , NC cut to Length Line , Cut to Machine
• 
  Slitting Line machine NC slitting machine , Sitting line , slitting machine
• 
  Slant CNC latheTCK56
• 
  HLC500 HLC630 HLC800 HLC1000 HLC1200 HMC machines center
• 
  CNC gantry type machining center